Installing USB Drivers (Hardware USB Bus & Virtual Com Port drivers)

1.	Click on the MaxStream Windows Driver.exe link from the Panther Probe website
	a. Click Run 	(If you are prompted "Are you sure you want to run this sofware?" click Run again)
	b. Click Unzip, then OK, then Close

2.	Connect the Xbee-PRO USB RF Modem to a PC using a USB cable.
	-> After the RF modem is detected by the PC, a "Found New Hardware Wizard" dialog box should appear.

3.	Select "Install from a specific list or location (Advanced) option; then select the 'Next' button.

4.	a. Select the 'Search for the best driver in these locations' option.
	b. Check 'Include this location in the search' box; then click the Browse button and locate the "C:\MaxStream\Windows drivers" folder
	    or type in "C:\MaxStream\Windows drivers" 
	c. Select the 'Next' button.
	-> "Windows Logo Testing" alert box appears.

5.	Select the 'Continue Anyway' button.

6.	Select the 'Finish' button.

7.	Reboot computer if prompted to do so.